TAMedia - 使用者貢獻 [zh-tw]

TAmedia Tracking Guide ZHTW

2025-10-01T08:08:12Z

CCYu：

= TAmedia Tracking 嵌入說明文件 =

本文說明如何在網站中整合 TAmedia 提供的追蹤碼，包括基底追蹤碼、頁面瀏覽事件、自訂事件，以及注意事項。

----

== 一、基底追蹤碼嵌入 ==

=== 插入位置 ===

請將以下程式碼放置於 <code><head></code> 標籤內，並'''緊貼 <code></head></code> 標籤上方'''。
若頁面內已經有相同的程式碼，'''不需要重複插入'''。

此段為 TAmedia 的追蹤主程式，會自動載入所需的追蹤工具（pixel.js）。

<source lang="html">
<script type="text/javascript">
(function(a,e,f,g,b,c,d){a.taq||(a[b]=a[b]||function(){a[b].q.push(arguments);a[b].tamTrackSendStatus&&a[b].tamTrackSendStatus()},a[b].q=a[b].q||[],c=e.createElement(f),d=e.getElementsByTagName(f)[0],c.async=1,c.src="https://adc.tamedia.com.tw/tr/"+g,d.parentNode.insertBefore(c,d))})(window,document,"script","pixel.js","taq");
</script>
</source>

----

== 二、頁面瀏覽事件 ==

=== 觸發時機 ===

當使用者瀏覽頁面時，請執行以下程式碼以送出對應事件。

此段會記錄使用者造訪特定頁面的行為，送出 <code>ViewContent</code> 事件。

<source lang="html">
<script type="text/javascript">
taq('track', '{your-campaign-id-goes-here}', 'ViewContent');
</script>
</source>

----

== 三、自訂事件追蹤 ==

=== 自訂事件用途 ===

當網站上發生特定操作（如：完成註冊、按下特定按鈕、成功送出表單）時，可執行下列程式碼以記錄該事件。

<code>{your-event-name-goes-here}</code> 是自訂事件名稱（如 <code>Customer00001</code>）依每個專案不同，需由 TAmedia 預先設定。

這段程式碼可記錄自訂的行為事件，事件名稱須與 TAmedia 系統中的設定一致。

<source lang="html">
<script type="text/javascript">
taq('trackCustom', '{your-campaign-id-goes-here}', '{your-event-name-goes-here}');
</script>
</source>

----

== 附註 ==

* 所有事件的識別碼 <code>'{your-campaign-id-goes-here}'</code> 請依專案來設定。
* <code>taq</code> 物件必須在基底追蹤碼執行後才可呼叫，否則可能會發生錯誤。
* 若需追蹤多個不同事件，可重複使用 <code>taq('trackCustom', ...)</code> 並更換事件名稱。
* 若需確認追蹤是否成功，請聯繫 TAMedia 技術團隊協助提供報表或進行驗證。

----

'''聯絡方式'''
如需進一步整合支援，請聯絡 TAmedia 技術支援團隊。

TAmedia Tracking Guide ZHTW

2025-10-01T08:06:45Z

CCYu：

TAMedia MobileWeb InRead 廣告使用 AdManager 串接教學

2025-10-01T07:53:33Z

CCYu：

== TAMedia 廣告與 Ad Manager 廣告大小對應表 ==

{| class="wikitable"
| TAMedia 廣告類型
| AD Manager 對應的廣告大小
|-
| InRead 300 x 250
| 1 x 1 or 300 x 250
|-
| InRead 1200 x 627
| 1 x 1
|-
| InRead Interscroller
| 1 x 1
|-
| InRead Anchor
| 1 x 1
|}

== 使用 Ad Manager 的串接方法 - 方法 1<font color = Purple>（建議使用）</font> ==
<font color = Green>選擇 Ad Manager 廣告單元 '''1 x 1''' 進行串接</font><br>
* 放送到 Safeframe：<font color = Scarlet>'''請勿勾選'''</font><br>
* 請自行先將請求廣告（adLoad2）之參數自行修改再使用<br>
* 直接貼到 Ad Manager "第三方"串接範例：<br>
<script type="text/javascript" src="https://adc.tamedia.com.tw/rmadp/static/js/tam-dfp-mediation.js"></script><br>
<script type="text/javascript" language="javascript"><br>
<nowiki>adLoad2('testSlot12345', '', 'div-tam-ad-testSlot12345', true, 0, tamOnReceiveAd);</nowiki><br>
function tamOnReceiveAd(status){<br>
console.log('[TAMedia] InRead Callback status : ' + status);<br>
}<br>
</script>

<font color = Blue>'''使用 Passback'''</font><br>
* 請從 Ad Manager 以一般產出代碼方式取得必要資訊帶入 dfpPassback 函式（依序為 "'''廣告單元ID'''", "'''Div Tag ID'''", "'''Size Array'''"）<br>
<script type="text/javascript" src="https://adc.tamedia.com.tw/rmadp/static/js/tam-dfp-mediation.js"></script><br>
<script type="text/javascript" language="javascript"><br>
<nowiki>adLoad2('testSlot12345', '', 'div-tam-ad-testSlot12345', true, 0, tamOnReceiveAd);</nowiki><br>
function tamOnReceiveAd(status){<br>
console.log('[TAMedia] InRead Callback status : ' + status);<br>
if('00' != status){<br>
dfpPassback('/12345678/intOTHER_12345678', 'div-gpt-ad-1234567890-0', [1, 1]);<br>
}<br>
}<br>
</script>

== 使用 Ad Manager 的串接方法 - 方法 2（Only For InRead 300 x 250） ==
<font color = Green>選擇 Ad Manager 廣告單元 '''300 x 250''' 進行串接</font><br>
* 放送到 Safeframe：'''請勾選'''<br>
* 請自行先將請求廣告（adLoad2）之參數自行修改再使用<br>
* 直接貼到 Ad Manager "第三方"串接範例：<br>
<script type="text/javascript" src="https://adc.tamedia.com.tw/rmadp/static/js/gm-sdk7-mobile.js"></script><br>
<nowiki><div id="div-tam-ad-testSlot12345"></div></nowiki><br>
<script type="text/javascript" language="javascript"><br>
function adManagerCurl(){<br>
return "%%PATTERN:url%%";<br>
}<br>
<nowiki>adLoad2('testSlot12345', '', 'div-tam-ad-testSlot12345', true, 0, tamOnReceiveAd);</nowiki><br>
function tamOnReceiveAd(status){<br>
console.log('[TAMedia] InRead Callback status : ' + status);<br>
}<br>
</script>
<font color = Blue>'''使用 Passback'''</font><br>

* Passback 資訊請自行修改<br>
<script type="text/javascript" src="https://adc.tamedia.com.tw/rmadp/static/js/gm-sdk7-mobile.js"></script><br>
<script async src="https://securepubads.g.doubleclick.net/tag/js/gpt.js"></script><br>
<nowiki><div id="div-tam-ad-testSlot12345"></div></nowiki><br>
<nowiki><div id="gpt-passback"></nowiki><br>
<script type="text/javascript" language="javascript"><br>
function adManagerCurl(){<br>
return "%%PATTERN:url%%";<br>
}<br>
<nowiki>adLoad2('testSlot12345', '', 'div-tam-ad-testSlot12345', true, 0, tamOnReceiveAd);</nowiki><br>
function tamOnReceiveAd(status){<br>
console.log('[TAMedia] InRead Callback status : ' + status);<br>
<nowiki>if('00' != status){</nowiki><br>
<nowiki>console.log('[TAMedia] Call To Passback.');

gamPassback();</nowiki><br>
<nowiki>}</nowiki><br>
<nowiki>}</nowiki><br>
<nowiki>function gamPassback(){

window.googletag = window.googletag || {cmd: []};

googletag.cmd.push(function() {

googletag.defineSlot('/12345678/OTHER_12345678', [300, 250], 'gpt-passback').addService(googletag.pubads());

googletag.pubads().set('page_url', '%%PATTERN:url%%');

googletag.enableServices();

googletag.display('gpt-passback');

});</nowiki><br>
}<br>
</script><br>
<nowiki></div></nowiki>

== TAMedia Callback Function 參數 ==
{| class="wikitable"
| Callback Function 參數
| 說明
|-
| 00
| 請求廣告成功
|-
| 20
| 請求廣告成功，但無廣告
|}

Mobile SDK Developer Guide

2025-10-01T07:51:32Z

CCYu：

TAMedia Mobile Web SDK 開發指南

=== [[Mobile Banner 、 Interstitial|橫幅廣告（Banner）| 插頁式廣告（Interstitial)]] ===

=== [[Mobile NativeAdvance|原生性廣告（Native Advance）]] ===

=== [[Mobile InReadAd|InRead廣告（InRead Ads）]] ===

=== [[Mobile InStream|In-Stream廣告（In-Stream Ads）]] ===

<br><br>
[[首頁|回首頁]]

Mobile Banner 、 Interstitial

2025-10-01T07:49:36Z

CCYu：建立內容為「 == 使用說明 == 1. 設定doctype<br> <!DOCTYPE html> 2. 於<head></head>之間插入以下程式碼（meta tag 設定根據狀況自行調整）<br> <meta name="viewport" content="width=device-width, initial-scale=1.0, minimum-scale=1.0, maximum-scale=1.0"/><br> <script type="text/javascript" src="https://adc.tamedia.com.tw/rmadp/static/js/gm-sdk8-mobile.js"></script> 3. 於<body></body>之間插入以下程式碼，貼放的位置即為展示的位…」的新頁面

== 使用說明 ==

1. 設定doctype<br>
<!DOCTYPE html>
2. 於<head></head>之間插入以下程式碼（meta tag 設定根據狀況自行調整）<br>
<meta name="viewport" content="width=device-width, initial-scale=1.0, minimum-scale=1.0, maximum-scale=1.0"/><br>
<script type="text/javascript" src="https://adc.tamedia.com.tw/rmadp/static/js/gm-sdk8-mobile.js"></script>
3. 於<body></body>之間插入以下程式碼，貼放的位置即為展示的位置，請自行調整<font color = Scarlet>（請求廣告參數及各參數應使用之型別請記得修改，詳見範例程式）</font><br>
<nowiki><div id="div-tam-ad-slotSubId"></div></nowiki><br>
<script type="text/javascript" language="javascript"><br>
adLoad2(slotSubId, venderId, containerId, openNewWindow, testFlag, callback);<br>
</script>

{| class="wikitable"
| 參數名稱
| 參數型別
| 參數值
| 說明
|-
| slotSubId
| String
|
| 廣告版位ID，由TAMedia提供
|-
| venderId
| String
|
| 請保留為空字串
|-
| containerId
| String
| 自定義的 Html div id
| 預設為：div-tam-ad-slotSubId
|-
| openNewWindow
| Boolean
| true, false
| 請代入true
|-
| testFlag
| Int
| 0, 1
| 是否為測試模式<br>0：正式模式<br>1：測試模式
|-
| callback
| Function
| Callback function
| 為 Callback Funciton 供 SDK 回傳值使用
|}

== Callback Function 參數 ==
{| class="wikitable"
| Callback Function 參數
| 說明
|-
| 00
| 請求廣告成功
|-
| 20
| 請求廣告成功，但無廣告
|}

== 範例程式 ==
<!DOCTYPE html>
<html>
<head>
<meta name="viewport" content="width=device-width, initial-scale=1.0, minimum-scale=1.0, maximum-scale=1.0"/>
<script type="text/javascript" src="https://adc.tamedia.com.tw/rmadp/static/js/gm-sdk8-mobile.js"></script>
</head>
<body>
<nowiki><div id="div-tam-ad-testslotid123456"></div></nowiki>
<script type="text/javascript" language="javascript">
<nowiki>adLoad2('testslotid123456', '', 'div-tam-ad-testslotid123456', true, 0, callback);</nowiki>
function callback(status){
console.log('[TAMedia] Callback status : ' + status);
}
</script>
</body>
</html>

== Ad Manager 串接教學（For Banner & 插頁式廣告） ==
請見 [[TAMedia MobileWeb Banner & 插頁式廣告使用 AdManager 串接教學|TAMedia MobileWeb Banner & 插頁式廣告使用 AdManager 串接教學]]<br>

Mobile SDK Developer Guide

2025-10-01T07:48:33Z

CCYu：/* 橫幅廣告（Banner）| 插頁式廣告（Interstitial） */

TAMedia MobileWeb Banner & 插頁式廣告使用 AdManager 串接教學

2025-10-01T07:46:59Z

CCYu：

== TAMedia 廣告與 Ad Manager 廣告大小對應表 ==

{| class="wikitable"
| TAMedia 廣告類型
| AD Manager 對應的廣告大小
|-
| 插頁式廣告
| 320 x 480 or 1 x 1
|-
| 長型Banner
| 320 x 50
|-
| 方型Banner
| 300 x 250
|}

== 使用 Ad Manager 的串接方法 - 方法 1<font color = Purple>（建議使用）</font> ==
<font color = Green>選擇 Ad Manager 廣告單元 '''對應之廣告大小''' 進行串接（以下以插頁式廣告為例）</font><br>
* <font color = Scarlet>插頁式廣告，開發商須自行製作叉叉覆蓋在廣告之上去處理廣告移除</font><br>
* 放送到 Safeframe：'''請勾選'''<br>
* 請自行先將請求廣告（adLoad2）之參數自行修改再使用<br>
* 直接貼到 Ad Manager "第三方"串接範例：<br>
<script type="text/javascript" src="https://adc.tamedia.com.tw/rmadp/static/js/gm-sdk8-mobile.js"></script><br>
<nowiki><div id="div-tam-ad-testSlot12345"></div></nowiki><br>
<script type="text/javascript" language="javascript"><br>
function adManagerCurl(){<br>
return "%%PATTERN:url%%";<br>
}<br>
<nowiki>adLoad2('testSlot12345', '', 'div-tam-ad-testSlot12345', true, 0, tamOnReceiveAdInt);</nowiki><br>
function tamOnReceiveAdInt(status){<br>
console.log('[TAMedia] Int Callback status : ' + status);<br>
}<br>
</script>
<font color = Blue>'''使用 Passback'''</font><br>
* Passback 資訊請自行修改<br>
<script type="text/javascript" src="https://adc.tamedia.com.tw/rmadp/static/js/gm-sdk8-mobile.js"></script><br>
<script async src="https://securepubads.g.doubleclick.net/tag/js/gpt.js"></script><br>
<nowiki><div id="div-tam-ad-testSlot12345"></div></nowiki><br>
<nowiki><div id="gpt-passback"></nowiki><br>
<script type="text/javascript" language="javascript"><br>
function adManagerCurl(){<br>
return "%%PATTERN:url%%";<br>
}<br>
<nowiki>adLoad2('testSlot12345', '', 'div-tam-ad-testSlot12345', true, 0, tamOnReceiveAdInt);</nowiki><br>
function tamOnReceiveAdInt(status){<br>
console.log('[TAMedia] Int Callback status : ' + status);<br>
<nowiki>if('00' != status){</nowiki><br>
<nowiki>console.log('[TAMedia] Call To Passback.');

gamPassback();</nowiki><br>
<nowiki>}</nowiki><br>
<nowiki>}</nowiki><br>
<nowiki>function gamPassback(){

window.googletag = window.googletag || {cmd: []};

googletag.cmd.push(function() {

googletag.defineSlot('/12345678/intOTHER_12345678', [320, 480], 'gpt-passback').addService(googletag.pubads());

googletag.pubads().set('page_url', '%%PATTERN:url%%');

googletag.enableServices();

googletag.display('gpt-passback');

});</nowiki><br>
}<br>
</script><br>
<nowiki></div></nowiki>

== 使用 Ad Manager 的串接方法 - 方法 2 ==
<font color = Green>選擇 Ad Manager 廣告單元 '''1 x 1''' 進行串接（以下以插頁式廣告為例）</font><br>
* 放送到 Safeframe：<font color = Scarlet>'''請勿勾選'''</font><br>
* 請自行先將請求廣告（adLoad2）之參數自行修改再使用<br>
* 直接貼到 Ad Manager "第三方"串接範例：<br>
<script type="text/javascript" src="https://adc.tamedia.com.tw/rmadp/static/js/tam-dfp-mediation.js"></script><br>
<script type="text/javascript" language="javascript"><br>
<nowiki>adLoad2('testSlot12345', '', 'div-tam-ad-testSlot12345', true, 0, tamOnReceiveAdInt);</nowiki><br>
function tamOnReceiveAdInt(status){<br>
console.log('[TAMedia] Int Callback status : ' + status);<br>
}<br>
</script>

<font color = Blue>'''使用 Passback'''</font><br>
* 請從 Ad Manager 以一般產出代碼方式取得必要資訊帶入 dfpPassback 函式（依序為 "'''廣告單元ID'''", "'''Div Tag ID'''", "'''Size Array'''"）<br>
<script type="text/javascript" src="https://adc.tamedia.com.tw/rmadp/static/js/tam-dfp-mediation.js"></script><br>
<script type="text/javascript" language="javascript"><br>
<nowiki>adLoad2('testSlot12345', '', 'div-tam-ad-testSlot12345', true, 0, tamOnReceiveAdInt);</nowiki><br>
function tamOnReceiveAdInt(status){<br>
console.log('[TAMedia] Int Callback status : ' + status);<br>
if('00' != status){<br>
dfpPassback('/12345678/intOTHER_12345678', 'div-gpt-ad-1234567890-0', [320, 480]);<br>
}<br>
}<br>
</script>

== TAMedia Callback Function 參數 ==
{| class="wikitable"
| Callback Function 參數
| 說明
|-
| 00
| 請求廣告成功
|-
| 20
| 請求廣告成功，但無廣告
|}

Mobile Banner 、 Interstitial and FloatAd

2025-10-01T07:44:56Z

CCYu：/* 範例程式 */

Mobile Banner 、 Interstitial and FloatAd

2025-10-01T07:44:08Z

CCYu：

== 使用說明 ==

1. 設定doctype<br>
<!DOCTYPE html>
2. 於<head></head>之間插入以下程式碼（meta tag 設定根據狀況自行調整）<br>
<meta name="viewport" content="width=device-width, initial-scale=1.0, minimum-scale=1.0, maximum-scale=1.0"/><br>
<script type="text/javascript" src="https://adc.tamedia.com.tw/rmadp/static/js/gm-sdk8-mobile.js"></script>
3. 於<body></body>之間插入以下程式碼，貼放的位置即為展示的位置，請自行調整<font color = Scarlet>（請求廣告參數及各參數應使用之型別請記得修改，詳見範例程式）</font><br>
<nowiki><div id="div-tam-ad-slotSubId"></div></nowiki><br>
<script type="text/javascript" language="javascript"><br>
adLoad2(slotSubId, venderId, containerId, openNewWindow, testFlag, callback);<br>
</script>

{| class="wikitable"
| 參數名稱
| 參數型別
| 參數值
| 說明
|-
| slotSubId
| String
|
| 廣告版位ID，由TAMedia提供
|-
| venderId
| String
|
| 請保留為空字串
|-
| containerId
| String
| 自定義的 Html div id
| 預設為：div-tam-ad-slotSubId
|-
| openNewWindow
| Boolean
| true, false
| 請代入true
|-
| testFlag
| Int
| 0, 1
| 是否為測試模式<br>0：正式模式<br>1：測試模式
|-
| callback
| Function
| Callback function
| 為 Callback Funciton 供 SDK 回傳值使用
|}

== Callback Function 參數 ==
{| class="wikitable"
| Callback Function 參數
| 說明
|-
| 00
| 請求廣告成功
|-
| 20
| 請求廣告成功，但無廣告
|}

== 範例程式 ==
<!DOCTYPE html>
<html>
<head>
<meta name="viewport" content="width=device-width, initial-scale=1.0, minimum-scale=1.0, maximum-scale=1.0"/>
<script type="text/javascript" src="https://adc.tamedia.com.tw/rmadp/static/js/gm-sdk8-mobile.js"></script>
</head>
<body>
<nowiki><div id="div-tam-ad-testslotid123456"></div></nowiki>
<script type="text/javascript" language="javascript">
<nowiki>adLoad2('testslotid123456', '', 'div-tam-ad-testslotid123456', true, 0, callback, 1);</nowiki>
function callback(status){
console.log('[TAMedia] Callback status : ' + status);
}
</script>
</body>
</html>

== Ad Manager 串接教學（For Banner & 插頁式廣告） ==
請見 [[TAMedia MobileWeb Banner & 插頁式廣告使用 AdManager 串接教學|TAMedia MobileWeb Banner & 插頁式廣告使用 AdManager 串接教學]]<br>

TAmedia Tracking Guide ZHTW

2025-07-25T05:44:34Z

CCYu：

TAmedia Tracking Guide EN

2025-07-25T05:44:14Z

CCYu：

= TAmedia Tracking Integration Guide =

This document explains how to integrate the tracking code provided by TAmedia into a website. It covers the base tracking code, page view events, custom events, and important notes.

----

== 1. Base Tracking Code Integration ==

=== Placement ===

Insert the following code '''within the <head> tag''', right '''above the </head> tag'''.
If your page already includes this code, '''no need to insert repeatedly.'''.

This script is TAmedia’s main tracking script and will automatically load the required tracking tool (''pixel.js'').

<syntaxhighlight lang="html">
<script type="text/javascript">
(function(a,e,f,g,b,c,d){a.taq||(a[b]=a[b]||function(){a[b].q.push(arguments);a[b].tamTrackSendStatus&&a[b].tamTrackSendStatus()},a[b].q=a[b].q||[],c=e.createElement(f),d=e.getElementsByTagName(f)[0],c.async=1,c.src="https://adc.tamedia.com.tw/tr/"+g,d.parentNode.insertBefore(c,d))})(window,document,"script","pixel.js","taq");
</script>
</syntaxhighlight>

----

== 2. Page View Event ==

=== When to Trigger ===

When a user visits a page, execute the following script to send a corresponding event.

This records a ''ViewContent'' event indicating that the user visited a specific page.

<syntaxhighlight lang="html">
<script type="text/javascript">
taq('track', '{your-campaign-id-goes-here}', 'ViewContent');
</script>
</syntaxhighlight>

----

== 3. Custom Event Tracking ==

=== Purpose of Custom Events ===

When specific actions occur on your site (e.g., registration completed, a particular button clicked, a form successfully submitted), execute the following code to log the event.

<code>{your-event-name-goes-here}</code> is a custom event name (e.g., <code>Customer00001</code>) that must be pre-defined by TAmedia for each campaign.

This code logs a custom behavioral event. The event name must match the one configured in TAmedia’s system.

<syntaxhighlight lang="html">
<script type="text/javascript">
taq('trackCustom', '{your-campaign-id-goes-here}', '{your-event-name-goes-here}');
</script>
</syntaxhighlight>

----

== Notes ==

* The identifier <code>'{your-campaign-id-goes-here}'</code> should be configured according to the specific campaign.
* The <code>taq</code> object must be called '''after''' the base tracking script has been executed; otherwise, errors may occur.
* To track multiple different events, you can reuse <code>taq('trackCustom', ...)</code> with different event names.
* To confirm successful tracking, please contact the TAmedia technical team for reporting or verification support.

----

'''Contact Information'''
For further integration support, please contact the TAmedia technical support team.

TAmedia Tracking Guide ZHTW

2025-07-25T02:59:33Z

CCYu：

= TAmedia Tracking 嵌入說明文件 =

本文說明如何在網站中整合 TAmedia 提供的追蹤碼，包括基底追蹤碼、分類頁瀏覽事件、自訂事件，以及注意事項。

----

== 一、基底追蹤碼嵌入 ==

=== 插入位置 ===

請將以下程式碼放置於 <code><head></code> 標籤內，並'''緊貼 <code></head></code> 標籤上方'''。
若頁面內已經有相同的程式碼，'''不需要重複插入'''。

此段為 TAmedia 的追蹤主程式，會自動載入所需的追蹤工具（pixel.js）。

<source lang="html">
<script type="text/javascript">
(function(a,e,f,g,b,c,d){a.taq||(a[b]=a[b]||function(){a[b].q.push(arguments);a[b].tamTrackSendStatus&&a[b].tamTrackSendStatus()},a[b].q=a[b].q||[],c=e.createElement(f),d=e.getElementsByTagName(f)[0],c.async=1,c.src="https://adc.tamedia.com.tw/tr/"+g,d.parentNode.insertBefore(c,d))})(window,document,"script","pixel.js","taq");
</script>
</source>

----

== 二、頁面瀏覽事件 ==

=== 觸發時機 ===

當使用者瀏覽頁面時，請執行以下程式碼以送出對應事件。

此段會記錄使用者造訪特定頁面的行為，送出 <code>ViewContent</code> 事件。

<source lang="html">
<script type="text/javascript">
taq('track', '{your-campaign-id-goes-here}', 'ViewContent');
</script>
</source>

----

== 三、自訂事件追蹤 ==

=== 自訂事件用途 ===

當網站上發生特定操作（如：完成註冊、按下特定按鈕、成功送出表單）時，可執行下列程式碼以記錄該事件。

<code>{your-event-name-goes-here}</code> 是自訂事件名稱（如 <code>Customer00001</code>）依每個專案不同，需由 TAmedia 預先設定。

這段程式碼可記錄自訂的行為事件，事件名稱須與 TAmedia 系統中的設定一致。

<source lang="html">
<script type="text/javascript">
taq('trackCustom', '{your-campaign-id-goes-here}', '{your-event-name-goes-here}');
</script>
</source>

----

== 附註 ==

* 所有事件的識別碼 <code>'{your-campaign-id-goes-here}'</code> 請依專案來設定。
* <code>taq</code> 物件必須在基底追蹤碼執行後才可呼叫，否則可能會發生錯誤。
* 若需追蹤多個不同事件，可重複使用 <code>taq('trackCustom', ...)</code> 並更換事件名稱。
* 若需確認追蹤是否成功，請聯繫 TAMedia 技術團隊協助提供報表或進行驗證。

----

'''聯絡方式'''
如需進一步整合支援，請聯絡 TAmedia 技術支援團隊。

TAmedia Tracking Guide EN

2025-07-25T02:58:29Z

CCYu：

= TAmedia Tracking Integration Guide =

This document explains how to integrate the tracking code provided by TAmedia into a website. It covers the base tracking code, category page view events, custom events, and important notes.

----

== 1. Base Tracking Code Integration ==

=== Placement ===

Insert the following code '''within the <head> tag''', right '''above the </head> tag'''.
If your page already includes this code, '''no need to insert repeatedly.'''.

This script is TAmedia’s main tracking script and will automatically load the required tracking tool (''pixel.js'').

<syntaxhighlight lang="html">
<script type="text/javascript">
(function(a,e,f,g,b,c,d){a.taq||(a[b]=a[b]||function(){a[b].q.push(arguments);a[b].tamTrackSendStatus&&a[b].tamTrackSendStatus()},a[b].q=a[b].q||[],c=e.createElement(f),d=e.getElementsByTagName(f)[0],c.async=1,c.src="https://adc.tamedia.com.tw/tr/"+g,d.parentNode.insertBefore(c,d))})(window,document,"script","pixel.js","taq");
</script>
</syntaxhighlight>

----

== 2. Page View Event ==

=== When to Trigger ===

When a user visits a page, execute the following script to send a corresponding event.

This records a ''ViewContent'' event indicating that the user visited a specific page.

<syntaxhighlight lang="html">
<script type="text/javascript">
taq('track', '{your-campaign-id-goes-here}', 'ViewContent');
</script>
</syntaxhighlight>

----

== 3. Custom Event Tracking ==

=== Purpose of Custom Events ===

When specific actions occur on your site (e.g., registration completed, a particular button clicked, a form successfully submitted), execute the following code to log the event.

<code>{your-event-name-goes-here}</code> is a custom event name (e.g., <code>Customer00001</code>) that must be pre-defined by TAmedia for each campaign.

This code logs a custom behavioral event. The event name must match the one configured in TAmedia’s system.

<syntaxhighlight lang="html">
<script type="text/javascript">
taq('trackCustom', '{your-campaign-id-goes-here}', '{your-event-name-goes-here}');
</script>
</syntaxhighlight>

----

== Notes ==

* The identifier <code>'{your-campaign-id-goes-here}'</code> should be configured according to the specific campaign.
* The <code>taq</code> object must be called '''after''' the base tracking script has been executed; otherwise, errors may occur.
* To track multiple different events, you can reuse <code>taq('trackCustom', ...)</code> with different event names.
* To confirm successful tracking, please contact the TAmedia technical team for reporting or verification support.

----

'''Contact Information'''
For further integration support, please contact the TAmedia technical support team.

TAmedia Tracking Guide EN

2025-07-25T02:53:17Z

CCYu：

= TAMedia Tracking Integration Guide =

This document explains how to integrate the tracking code provided by TAMedia into a website. It covers the base tracking code, category page view events, custom events, and important notes.

----

== 1. Base Tracking Code Integration ==

=== Placement ===

Insert the following code '''within the <head> tag''', right '''above the </head> tag'''.
If your page already includes this code, '''no need to insert repeatedly.'''.

This script is TAMedia’s main tracking script and will automatically load the required tracking tool (''pixel.js'').

<syntaxhighlight lang="html">
<script type="text/javascript">
(function(a,e,f,g,b,c,d){a.taq||(a[b]=a[b]||function(){a[b].q.push(arguments);a[b].tamTrackSendStatus&&a[b].tamTrackSendStatus()},a[b].q=a[b].q||[],c=e.createElement(f),d=e.getElementsByTagName(f)[0],c.async=1,c.src="https://adc.tamedia.com.tw/tr/"+g,d.parentNode.insertBefore(c,d))})(window,document,"script","pixel.js","taq");
</script>
</syntaxhighlight>

----

== 2. Page View Event ==

=== When to Trigger ===

When a user visits a page, execute the following script to send a corresponding event.

This records a ''ViewContent'' event indicating that the user visited a specific page.

<syntaxhighlight lang="html">
<script type="text/javascript">
taq('track', '{your-campaign-id-goes-here}', 'ViewContent');
</script>
</syntaxhighlight>

----

== 3. Custom Event Tracking ==

=== Purpose of Custom Events ===

When specific actions occur on your site (e.g., registration completed, a particular button clicked, a form successfully submitted), execute the following code to log the event.

<code>{your-event-name-goes-here}</code> is a custom event name (e.g., <code>Customer00001</code>) that must be pre-defined by TAMedia for each campaign.

This code logs a custom behavioral event. The event name must match the one configured in TAMedia’s system.

<syntaxhighlight lang="html">
<script type="text/javascript">
taq('trackCustom', '{your-campaign-id-goes-here}', '{your-event-name-goes-here}');
</script>
</syntaxhighlight>

----

== Notes ==

* The identifier <code>'{your-campaign-id-goes-here}'</code> should be configured according to the specific campaign.
* The <code>taq</code> object must be called '''after''' the base tracking script has been executed; otherwise, errors may occur.
* To track multiple different events, you can reuse <code>taq('trackCustom', ...)</code> with different event names.
* To confirm successful tracking, please contact the TAMedia technical team for reporting or verification support.

----

'''Contact Information'''
For further integration support, please contact the TAMedia technical support team.

TAmedia Tracking Guide ZHTW

2025-07-25T02:35:59Z

CCYu：/* 二、分類頁面瀏覽事件 */

= TAMedia Tracking 嵌入說明文件 =

本文說明如何在網站中整合 TAMedia 提供的追蹤碼，包括基底追蹤碼、分類頁瀏覽事件、自訂事件，以及注意事項。

----

== 一、基底追蹤碼嵌入 ==

=== 插入位置 ===

請將以下程式碼放置於 <code><head></code> 標籤內，並'''緊貼 <code></head></code> 標籤上方'''。
若頁面內已經有相同的程式碼，'''不需要重複插入'''。

此段為 TAMedia 的追蹤主程式，會自動載入所需的追蹤工具（pixel.js）。

<source lang="html">
<script type="text/javascript">
(function(a,e,f,g,b,c,d){a.taq||(a[b]=a[b]||function(){a[b].q.push(arguments);a[b].tamTrackSendStatus&&a[b].tamTrackSendStatus()},a[b].q=a[b].q||[],c=e.createElement(f),d=e.getElementsByTagName(f)[0],c.async=1,c.src="https://adc.tamedia.com.tw/tr/"+g,d.parentNode.insertBefore(c,d))})(window,document,"script","pixel.js","taq");
</script>
</source>

----

== 二、頁面瀏覽事件 ==

=== 觸發時機 ===

當使用者瀏覽頁面時，請執行以下程式碼以送出對應事件。

此段會記錄使用者造訪特定頁面的行為，送出 <code>ViewContent</code> 事件。

<source lang="html">
<script type="text/javascript">
taq('track', '{your-campaign-id-goes-here}', 'ViewContent');
</script>
</source>

----

== 三、自訂事件追蹤 ==

=== 自訂事件用途 ===

當網站上發生特定操作（如：完成註冊、按下特定按鈕、成功送出表單）時，可執行下列程式碼以記錄該事件。

<code>{your-event-name-goes-here}</code> 是自訂事件名稱（如 <code>Customer00001</code>）依每個專案不同，需由 TAMedia 預先設定。

這段程式碼可記錄自訂的行為事件，事件名稱須與 TAMedia 系統中的設定一致。

<source lang="html">
<script type="text/javascript">
taq('trackCustom', '{your-campaign-id-goes-here}', '{your-event-name-goes-here}');
</script>
</source>

----

== 附註 ==

* 所有事件的識別碼 <code>'{your-campaign-id-goes-here}'</code> 請依專案來設定。
* <code>taq</code> 物件必須在基底追蹤碼執行後才可呼叫，否則可能會發生錯誤。
* 若需追蹤多個不同事件，可重複使用 <code>taq('trackCustom', ...)</code> 並更換事件名稱。
* 若需確認追蹤是否成功，請聯繫 TAMedia 技術團隊協助提供報表或進行驗證。

----

'''聯絡方式'''
如需進一步整合支援，請聯絡 TAMedia 技術支援團隊。

TAmedia Tracking Guide EN

2025-07-25T02:35:38Z

CCYu：/* 2. Category Page View Event */

= TAMedia Tracking Integration Guide =

This document explains how to integrate the tracking code provided by TAMedia into a website. It covers the base tracking code, category page view events, custom events, and important notes.

----

== 1. Base Tracking Code Integration ==

=== Placement ===

Insert the following code '''within the <head> tag''', right '''above the </head> tag'''.
If your page already includes this code, '''no need to insert repeatedly.'''.

This script is TAMedia’s main tracking script and will automatically load the required tracking tool (''pixel.js'').

<syntaxhighlight lang="html">
<script type="text/javascript">
(function(a,e,f,g,b,c,d){a.taq||(a[b]=a[b]||function(){a[b].q.push(arguments);a[b].tamTrackSendStatus&&a[b].tamTrackSendStatus()},a[b].q=a[b].q||[],c=e.createElement(f),d=e.getElementsByTagName(f)[0],c.async=1,c.src="https://adc.tamedia.com.tw/tr/"+g,d.parentNode.insertBefore(c,d))})(window,document,"script","pixel.js","taq");
</script>
</syntaxhighlight>

----

== 2. Page View Event ==

=== When to Trigger ===

When a user visits a page, execute the following script to send a corresponding event.

This records a ''ViewContent'' event indicating that the user visited a specific page.

<syntaxhighlight lang="html">
<script type="text/javascript">
taq('track', '{your-campaign-id-goes-here}', 'ViewContent');
</script>
</syntaxhighlight>

----

== 3. Custom Event Tracking ==

=== Purpose of Custom Events ===

When specific actions occur on your site (e.g., registration completed, a particular button clicked, a form successfully submitted), execute the following code to log the event.

<code>{your-event-name-goes-here}</code> is a custom event name (e.g., <code>Customer00001</code>) that must be pre-defined by TAMedia for each project.

This code logs a custom behavioral event. The event name must match the one configured in TAMedia’s system.

<syntaxhighlight lang="html">
<script type="text/javascript">
taq('trackCustom', '{your-campaign-id-goes-here}', '{your-event-name-goes-here}');
</script>
</syntaxhighlight>

----

== Notes ==

* The identifier <code>'{your-campaign-id-goes-here}'</code> should be configured according to the specific project.
* The <code>taq</code> object must be called '''after''' the base tracking script has been executed; otherwise, errors may occur.
* To track multiple different events, you can reuse <code>taq('trackCustom', ...)</code> with different event names.
* To confirm successful tracking, please contact the TAMedia technical team for reporting or verification support.

----

'''Contact Information'''
For further integration support, please contact the TAMedia technical support team.

TAmedia Tracking Guide EN

2025-07-25T02:34:54Z

CCYu：

= TAMedia Tracking Integration Guide =

This document explains how to integrate the tracking code provided by TAMedia into a website. It covers the base tracking code, category page view events, custom events, and important notes.

----

== 1. Base Tracking Code Integration ==

=== Placement ===

Insert the following code '''within the <head> tag''', right '''above the </head> tag'''.
If your page already includes this code, '''no need to insert repeatedly.'''.

This script is TAMedia’s main tracking script and will automatically load the required tracking tool (''pixel.js'').

<syntaxhighlight lang="html">
<script type="text/javascript">
(function(a,e,f,g,b,c,d){a.taq||(a[b]=a[b]||function(){a[b].q.push(arguments);a[b].tamTrackSendStatus&&a[b].tamTrackSendStatus()},a[b].q=a[b].q||[],c=e.createElement(f),d=e.getElementsByTagName(f)[0],c.async=1,c.src="https://adc.tamedia.com.tw/tr/"+g,d.parentNode.insertBefore(c,d))})(window,document,"script","pixel.js","taq");
</script>
</syntaxhighlight>

----

== 2. Category Page View Event ==

=== When to Trigger ===

When a user visits a page, execute the following script to send a corresponding event.

This records a ''ViewContent'' event indicating that the user visited a specific page.

<syntaxhighlight lang="html">
<script type="text/javascript">
taq('track', '{your-campaign-id-goes-here}', 'ViewContent');
</script>
</syntaxhighlight>

----

== 3. Custom Event Tracking ==

=== Purpose of Custom Events ===

When specific actions occur on your site (e.g., registration completed, a particular button clicked, a form successfully submitted), execute the following code to log the event.

<code>{your-event-name-goes-here}</code> is a custom event name (e.g., <code>Customer00001</code>) that must be pre-defined by TAMedia for each project.

This code logs a custom behavioral event. The event name must match the one configured in TAMedia’s system.

<syntaxhighlight lang="html">
<script type="text/javascript">
taq('trackCustom', '{your-campaign-id-goes-here}', '{your-event-name-goes-here}');
</script>
</syntaxhighlight>

----

== Notes ==

* The identifier <code>'{your-campaign-id-goes-here}'</code> should be configured according to the specific project.
* The <code>taq</code> object must be called '''after''' the base tracking script has been executed; otherwise, errors may occur.
* To track multiple different events, you can reuse <code>taq('trackCustom', ...)</code> with different event names.
* To confirm successful tracking, please contact the TAMedia technical team for reporting or verification support.

----

'''Contact Information'''
For further integration support, please contact the TAMedia technical support team.

TAmedia Tracking Guide ZHTW

2025-07-25T02:34:23Z

CCYu：/* 插入位置 */

= TAMedia Tracking 嵌入說明文件 =

本文說明如何在網站中整合 TAMedia 提供的追蹤碼，包括基底追蹤碼、分類頁瀏覽事件、自訂事件，以及注意事項。

----

== 一、基底追蹤碼嵌入 ==

=== 插入位置 ===

請將以下程式碼放置於 <code><head></code> 標籤內，並'''緊貼 <code></head></code> 標籤上方'''。
若頁面內已經有相同的程式碼，'''不需要重複插入'''。

此段為 TAMedia 的追蹤主程式，會自動載入所需的追蹤工具（pixel.js）。

<source lang="html">
<script type="text/javascript">
(function(a,e,f,g,b,c,d){a.taq||(a[b]=a[b]||function(){a[b].q.push(arguments);a[b].tamTrackSendStatus&&a[b].tamTrackSendStatus()},a[b].q=a[b].q||[],c=e.createElement(f),d=e.getElementsByTagName(f)[0],c.async=1,c.src="https://adc.tamedia.com.tw/tr/"+g,d.parentNode.insertBefore(c,d))})(window,document,"script","pixel.js","taq");
</script>
</source>

----

== 二、分類頁面瀏覽事件 ==

=== 觸發時機 ===

當使用者瀏覽頁面時，請執行以下程式碼以送出對應事件。

此段會記錄使用者造訪特定頁面的行為，送出 <code>ViewContent</code> 事件。

<source lang="html">
<script type="text/javascript">
taq('track', '{your-campaign-id-goes-here}', 'ViewContent');
</script>
</source>

----

== 三、自訂事件追蹤 ==

=== 自訂事件用途 ===

當網站上發生特定操作（如：完成註冊、按下特定按鈕、成功送出表單）時，可執行下列程式碼以記錄該事件。

<code>{your-event-name-goes-here}</code> 是自訂事件名稱（如 <code>Customer00001</code>）依每個專案不同，需由 TAMedia 預先設定。

這段程式碼可記錄自訂的行為事件，事件名稱須與 TAMedia 系統中的設定一致。

<source lang="html">
<script type="text/javascript">
taq('trackCustom', '{your-campaign-id-goes-here}', '{your-event-name-goes-here}');
</script>
</source>

----

== 附註 ==

* 所有事件的識別碼 <code>'{your-campaign-id-goes-here}'</code> 請依專案來設定。
* <code>taq</code> 物件必須在基底追蹤碼執行後才可呼叫，否則可能會發生錯誤。
* 若需追蹤多個不同事件，可重複使用 <code>taq('trackCustom', ...)</code> 並更換事件名稱。
* 若需確認追蹤是否成功，請聯繫 TAMedia 技術團隊協助提供報表或進行驗證。

----

'''聯絡方式'''
如需進一步整合支援，請聯絡 TAMedia 技術支援團隊。

TAmedia Tracking Guide ZHTW

2025-07-25T02:32:27Z

CCYu：

= TAMedia Tracking 嵌入說明文件 =

本文說明如何在網站中整合 TAMedia 提供的追蹤碼，包括基底追蹤碼、分類頁瀏覽事件、自訂事件，以及注意事項。

----

== 一、基底追蹤碼嵌入 ==

=== 插入位置 ===

請將以下程式碼放置於 <code><head></code> 標籤內，並'''緊貼 <code></head></code> 標籤上方'''。
若頁面內已經有相同的程式碼，請'''不要重複插入'''。

此段為 TAMedia 的追蹤主程式，會自動載入所需的追蹤工具（pixel.js）。

<source lang="html">
<script type="text/javascript">
(function(a,e,f,g,b,c,d){a.taq||(a[b]=a[b]||function(){a[b].q.push(arguments);a[b].tamTrackSendStatus&&a[b].tamTrackSendStatus()},a[b].q=a[b].q||[],c=e.createElement(f),d=e.getElementsByTagName(f)[0],c.async=1,c.src="https://adc.tamedia.com.tw/tr/"+g,d.parentNode.insertBefore(c,d))})(window,document,"script","pixel.js","taq");
</script>
</source>

----

== 二、分類頁面瀏覽事件 ==

=== 觸發時機 ===

當使用者瀏覽頁面時，請執行以下程式碼以送出對應事件。

此段會記錄使用者造訪特定頁面的行為，送出 <code>ViewContent</code> 事件。

<source lang="html">
<script type="text/javascript">
taq('track', '{your-campaign-id-goes-here}', 'ViewContent');
</script>
</source>

----

== 三、自訂事件追蹤 ==

=== 自訂事件用途 ===

當網站上發生特定操作（如：完成註冊、按下特定按鈕、成功送出表單）時，可執行下列程式碼以記錄該事件。

<code>{your-event-name-goes-here}</code> 是自訂事件名稱（如 <code>Customer00001</code>）依每個專案不同，需由 TAMedia 預先設定。

這段程式碼可記錄自訂的行為事件，事件名稱須與 TAMedia 系統中的設定一致。

<source lang="html">
<script type="text/javascript">
taq('trackCustom', '{your-campaign-id-goes-here}', '{your-event-name-goes-here}');
</script>
</source>

----

== 附註 ==

* 所有事件的識別碼 <code>'{your-campaign-id-goes-here}'</code> 請依專案來設定。
* <code>taq</code> 物件必須在基底追蹤碼執行後才可呼叫，否則可能會發生錯誤。
* 若需追蹤多個不同事件，可重複使用 <code>taq('trackCustom', ...)</code> 並更換事件名稱。
* 若需確認追蹤是否成功，請聯繫 TAMedia 技術團隊協助提供報表或進行驗證。

----

'''聯絡方式'''
如需進一步整合支援，請聯絡 TAMedia 技術支援團隊。

TAmedia Tracking Guide EN

2025-07-25T02:32:09Z

CCYu：

= TAMedia Tracking Integration Guide =

This document explains how to integrate the tracking code provided by TAMedia into a website. It covers the base tracking code, category page view events, custom events, and important notes.

----

== 1. Base Tracking Code Integration ==

=== Placement ===

Insert the following code '''within the <head> tag''', right '''above the </head> tag'''.
If your page already includes this code, '''do not insert it again'''.

This script is TAMedia’s main tracking script and will automatically load the required tracking tool (''pixel.js'').

<syntaxhighlight lang="html">
<script type="text/javascript">
(function(a,e,f,g,b,c,d){a.taq||(a[b]=a[b]||function(){a[b].q.push(arguments);a[b].tamTrackSendStatus&&a[b].tamTrackSendStatus()},a[b].q=a[b].q||[],c=e.createElement(f),d=e.getElementsByTagName(f)[0],c.async=1,c.src="https://adc.tamedia.com.tw/tr/"+g,d.parentNode.insertBefore(c,d))})(window,document,"script","pixel.js","taq");
</script>
</syntaxhighlight>

----

== 2. Category Page View Event ==

=== When to Trigger ===

When a user visits a page, execute the following script to send a corresponding event.

This records a ''ViewContent'' event indicating that the user visited a specific page.

<syntaxhighlight lang="html">
<script type="text/javascript">
taq('track', '{your-campaign-id-goes-here}', 'ViewContent');
</script>
</syntaxhighlight>

----

== 3. Custom Event Tracking ==

=== Purpose of Custom Events ===

When specific actions occur on your site (e.g., registration completed, a particular button clicked, a form successfully submitted), execute the following code to log the event.

<code>{your-event-name-goes-here}</code> is a custom event name (e.g., <code>Customer00001</code>) that must be pre-defined by TAMedia for each project.

This code logs a custom behavioral event. The event name must match the one configured in TAMedia’s system.

<syntaxhighlight lang="html">
<script type="text/javascript">
taq('trackCustom', '{your-campaign-id-goes-here}', '{your-event-name-goes-here}');
</script>
</syntaxhighlight>

----

== Notes ==

* The identifier <code>'{your-campaign-id-goes-here}'</code> should be configured according to the specific project.
* The <code>taq</code> object must be called '''after''' the base tracking script has been executed; otherwise, errors may occur.
* To track multiple different events, you can reuse <code>taq('trackCustom', ...)</code> with different event names.
* To confirm successful tracking, please contact the TAMedia technical team for reporting or verification support.

----

'''Contact Information'''
For further integration support, please contact the TAMedia technical support team.

TAmedia Tracking Guide EN

2025-07-25T02:31:17Z

CCYu：建立內容為「= TAMedia Tracking Integration Guide = This document explains how to integrate the tracking code provided by TAMedia into a website. It covers the base tracking code, category page view events, custom events, and important notes. ---- == 1. Base Tracking Code Integration == === Placement === Insert the following code '''within the <head> tag''', right '''above the </head> tag'''. If your page already includes this code, '''do not insert it again'''.…」的新頁面

= TAMedia Tracking Integration Guide =

This document explains how to integrate the tracking code provided by TAMedia into a website. It covers the base tracking code, category page view events, custom events, and important notes.

----

== 1. Base Tracking Code Integration ==

=== Placement ===

Insert the following code '''within the <head> tag''', right '''above the </head> tag'''.
If your page already includes this code, '''do not insert it again'''.

This script is TAMedia’s main tracking script and will automatically load the required tracking tool (''pixel.js'').

<syntaxhighlight lang="html">
<script type="text/javascript">
(function(a,e,f,g,b,c,d){a.taq||(a[b]=a[b]||function(){a[b].q.push(arguments);a[b].tamTrackSendStatus&&a[b].tamTrackSendStatus()},a[b].q=a[b].q||[],c=e.createElement(f),d=e.getElementsByTagName(f)[0],c.async=1,c.src="https://adc.tamedia.com.tw/tr/"+g,d.parentNode.insertBefore(c,d))})(window,document,"script","pixel.js","taq");
</script>
</syntaxhighlight>

----

== 2. Category Page View Event ==

=== When to Trigger ===

When a user visits a page, execute the following script to send a corresponding event.

This records a ''ViewContent'' event indicating that the user visited a specific page.

<syntaxhighlight lang="html">
<script type="text/javascript">
taq('track', '{your-campaign-id-goes-here}', 'ViewContent');
</script>
</syntaxhighlight>

----

== 3. Custom Event Tracking ==

=== Purpose of Custom Events ===

When specific actions occur on your site (e.g., registration completed, a particular button clicked, a form successfully submitted), execute the following code to log the event.

<code>{your-event-id-goes-here}</code> is a custom event name (e.g., <code>Customer00001</code>) that must be pre-defined by TAMedia for each project.

This code logs a custom behavioral event. The event name must match the one configured in TAMedia’s system.

<syntaxhighlight lang="html">
<script type="text/javascript">
taq('trackCustom', '{your-campaign-id-goes-here}', '{your-event-id-goes-here}');
</script>
</syntaxhighlight>

----

== Notes ==

* The identifier <code>'{your-campaign-id-goes-here}'</code> should be configured according to the specific project.
* The <code>taq</code> object must be called '''after''' the base tracking script has been executed; otherwise, errors may occur.
* To track multiple different events, you can reuse <code>taq('trackCustom', ...)</code> with different event names.
* To confirm successful tracking, please contact the TAMedia technical team for reporting or verification support.

----

'''Contact Information'''
For further integration support, please contact the TAMedia technical support team.

TAmedia Tracking Guide ZHTW

2025-07-25T02:29:26Z

CCYu：

= TAMedia Tracking 嵌入說明文件 =

本文說明如何在網站中整合 TAMedia 提供的追蹤碼，包括基底追蹤碼、分類頁瀏覽事件、自訂事件，以及注意事項。

----

== 一、基底追蹤碼嵌入 ==

=== 插入位置 ===

請將以下程式碼放置於 <code><head></code> 標籤內，並'''緊貼 <code></head></code> 標籤上方'''。
若頁面內已經有相同的程式碼，請'''不要重複插入'''。

此段為 TAMedia 的追蹤主程式，會自動載入所需的追蹤工具（pixel.js）。

<source lang="html">
<script type="text/javascript">
(function(a,e,f,g,b,c,d){a.taq||(a[b]=a[b]||function(){a[b].q.push(arguments);a[b].tamTrackSendStatus&&a[b].tamTrackSendStatus()},a[b].q=a[b].q||[],c=e.createElement(f),d=e.getElementsByTagName(f)[0],c.async=1,c.src="https://adc.tamedia.com.tw/tr/"+g,d.parentNode.insertBefore(c,d))})(window,document,"script","pixel.js","taq");
</script>
</source>

----

== 二、分類頁面瀏覽事件 ==

=== 觸發時機 ===

當使用者瀏覽頁面時，請執行以下程式碼以送出對應事件。

此段會記錄使用者造訪特定頁面的行為，送出 <code>ViewContent</code> 事件。

<source lang="html">
<script type="text/javascript">
taq('track', '{your-campaign-id-goes-here}', 'ViewContent');
</script>
</source>

----

== 三、自訂事件追蹤 ==

=== 自訂事件用途 ===

當網站上發生特定操作（如：完成註冊、按下特定按鈕、成功送出表單）時，可執行下列程式碼以記錄該事件。

<code>{your-event-id-goes-here}</code> 是自訂事件名稱（如 <code>Customer00001</code>）依每個專案不同，需由 TAMedia 預先設定。

這段程式碼可記錄自訂的行為事件，事件名稱須與 TAMedia 系統中的設定一致。

<source lang="html">
<script type="text/javascript">
taq('trackCustom', '{your-campaign-id-goes-here}', '{your-event-id-goes-here}');
</script>
</source>

----

== 附註 ==

* 所有事件的識別碼 <code>'{your-campaign-id-goes-here}'</code> 請依專案來設定。
* <code>taq</code> 物件必須在基底追蹤碼執行後才可呼叫，否則可能會發生錯誤。
* 若需追蹤多個不同事件，可重複使用 <code>taq('trackCustom', ...)</code> 並更換事件名稱。
* 若需確認追蹤是否成功，請聯繫 TAMedia 技術團隊協助提供報表或進行驗證。

----

'''聯絡方式'''
如需進一步整合支援，請聯絡 TAMedia 技術支援團隊。

TAmedia Tracking Guide ZHTW

2025-07-25T02:26:32Z

CCYu：建立內容為「# TAMedia Tracking 嵌入說明文件本文說明如何在網站中整合 TAMedia 提供的追蹤碼，包括基底追蹤碼、分類頁瀏覽事件、自訂事件，以及注意事項。 --- ## 一、基底追蹤碼嵌入 ### 插入位置請將以下程式碼放置於 `<head>` 標籤內，並**緊貼 `</head>` 標籤上方**。若頁面內已經有相同的程式碼，請**不要重複插入**。此段為 TAMedia 的追蹤主程式，會自動…」的新頁面

# TAMedia Tracking 嵌入說明文件

本文說明如何在網站中整合 TAMedia 提供的追蹤碼，包括基底追蹤碼、分類頁瀏覽事件、自訂事件，以及注意事項。

---

## 一、基底追蹤碼嵌入

### 插入位置

請將以下程式碼放置於 `<head>` 標籤內，並**緊貼 `</head>` 標籤上方**。
若頁面內已經有相同的程式碼，請**不要重複插入**。

此段為 TAMedia 的追蹤主程式，會自動載入所需的追蹤工具（pixel.js）。

```html
<script type="text/javascript">
(function(a,e,f,g,b,c,d){a.taq||(a[b]=a[b]||function(){a[b].q.push(arguments);a[b].tamTrackSendStatus&&a[b].tamTrackSendStatus()},a[b].q=a[b].q||[],c=e.createElement(f),d=e.getElementsByTagName(f)[0],c.async=1,c.src="https://adc.tamedia.com.tw/tr/"+g,d.parentNode.insertBefore(c,d))})(window,document,"script","pixel.js","taq");
</script>
```

---

## 二、分類頁面瀏覽事件

### 觸發時機

當使用者瀏覽頁面時，請執行以下程式碼以送出對應事件。

此段會記錄使用者造訪特定頁面的行為，送出 `ViewContent` 事件。

```html
<script type="text/javascript">
taq('track', '{your-campaign-id-goes-here}', 'ViewContent');
</script>
```

---

## 三、自訂事件追蹤

### 自訂事件用途

當網站上發生特定操作（如：完成註冊、按下特定按鈕、成功送出表單）時，可執行下列程式碼以記錄該事件。

`{your-event-id-goes-here}` 是自訂事件名稱（如 `Customer00001`）依每個專案不同，需由 TAMedia 預先設定。

這段程式碼可記錄自訂的行為事件，事件名稱須與 TAMedia 系統中的設定一致。

```html
<script type="text/javascript">
taq('trackCustom', '{your-campaign-id-goes-here}', '{your-event-id-goes-here}');
</script>
```

---

## 附註

- 所有事件的識別碼 `'{your-campaign-id-goes-here}'` 請依專案來設定。
- `taq` 物件必須在基底追蹤碼執行後才可呼叫，否則可能會發生錯誤。
- 若需追蹤多個不同事件，可重複使用 `taq('trackCustom', ...)` 並更換事件名稱。
- 若需確認追蹤是否成功，請聯繫 TAMedia 技術團隊協助提供報表或進行驗證。

---

**聯絡方式**
如需進一步整合支援，請聯絡 TAMedia 技術支援團隊。

TAmedia Tracking Guide

2025-07-25T02:26:18Z

CCYu：/* 英文 */

TAmedia Tracking 指南

=== [[TAmedia_Tracking_Guide_ZHTW|中文]] ===

=== [[TAmedia_Tracking_Guide_EN|English]] ===

<br><br>
[[首頁|回首頁]]

TAmedia Tracking Guide

2025-07-25T02:26:04Z

CCYu：建立內容為「TAmedia Tracking 指南 === 中文 === === 英文 === <br><br> 回首頁」的新頁面

TAmedia Tracking 指南

=== [[TAmedia_Tracking_Guide_ZHTW|中文]] ===

=== [[TAmedia_Tracking_Guide_EN|英文]] ===

<br><br>
[[首頁|回首頁]]

首頁

2025-07-25T02:24:08Z

CCYu：

==SDK for Android App==

[[SDK8 Android_SDK_Developer_Guide |Android SDK Developer Guide]]

==SDK for iOS App==


[[SDK8 iOS SDK Developer Guide |iOS SDK Developer Guide]]

==SDK for Mobile Web==

[[Mobile_SDK_Developer_Guide|Mobile Web SDK Developer Guide]]

==TAmedia Tracking==

[[TAmedia_Tracking_Guide|TAmedia Tracking Guide]]

檔案:TAMediaAndroidSDK 8.0.3.zip

2022-03-24T04:42:02Z

CCYu：CCYu 已上傳檔案:TAMediaAndroidSDK 8.0.3.zip

Download MADP Android SDK

2022-03-24T04:41:26Z

CCYu：

{| class="wikitable"
|-
! Version !! Package !! Size !! Notes
|-
|2.0.0 || TAMediaSDK_2.0.0 || 1475 KB || Initial release
|-
|2.0.1 || TAMediaSDK_2.0.1 || 1475 KB || 修復若干NullpointerException問題
|-
|2.0.2 || TAMediaSDK_2.0.2 || 1567 KB ||
* 因應google play 內容政策修訂, 增訂對google play sevice的支援
* 修復若干已知問題
|-
|2.0.3 || TAMediaSDK_2.0.3 || 1588 KB ||
* 調整插頁式廣告載入程序以促進更良好的用戶經驗
|-
|2.0.4 || TAMediaSDK_2.0.4 || 1588 KB ||
* 修復因未設定TWMVideoAdListener所導致的NullPointerException問題
* 修復若干畫面顯示不正常的現象
|-
|2.0.5 || TAMediaSDK_2.0.5 || 1587 KB ||

* 功能優化, 支援多種多媒體效果

|-
|2.0.6 || TAMediaSDK_2.0.6 || 1587 KB ||
* SDK穩定性調整
|-
|3.0.0 || TAMediaSDK_3.0.0 || 1876 KB ||
* 提供SMART_BANNER廣告型態
* 提供原生性廣告型態
|-
|3.0.1 || TAMediaSDK_3.0.1 || 1876 KB ||
* 針對插頁式廣告以及影音廣告呈現優化
|-
|4.0.0c ||TAMediaSDK_4.0.0c || 1920 KB ||
* 移除READ_PHONE_STATE權限
* 新增懸浮類型廣告
* 原生性廣告新增支援1200X627圖示
* 全版廣告支援互動效果(麥克風&補光燈)
|-
|4.0.1 ||TAMediaAndroidSDK_4.0.1 || 1920 KB ||
* 廣告效能優化
|-
|5.0.1 ||TAMediaAndroidSDK_5.0.1 || 1.88 MB ||
* SDK 穩定性調整
* 增加互動式插頁廣告種類
* 優化插頁: 小鍵盤不再擋住輸入框
* 調整 Callback 時機
|-
|5.0.2 || TAMediaAndroidSDK_5.0.2 || 2.02 MB ||
* 修正部份 Samsung 手機在特定狀況出現異常的問題
|-
|6.0.0 || TAMediaAndroidSDK_6.0.0 || 539 KB ||
* SDK 穩定性調整
* 新增 InRead 類型廣告
* 網路模組更改為 Retrofit 2
* 導入 MRAID 2.0 架構
|-
|6.1.1 || TAMediaAndroidSDK_6.1.1 || 908 KB ||
* SDK 功能優化
* Minor Fix
|-
|6.1.2 || TAMediaAndroidSDK_6.1.2 || 908 KB ||
* Minor Fix
|-
|6.2.0 || TAMediaAndroidSDK_6.2.0 || 908 KB ||
* SDK 功能優化
|-
|7.0.0 || TAMediaAndroidSDK_7.0.0 || 959 KB ||
* 新增可支援的廣告素材
* SDK 功能優化
|-
|7.0.1 || TAMediaAndroidSDK_7.0.1 || 959 KB ||
* Minor Fix
|-
|7.0.2 || TAMediaAndroidSDK_7.0.2 || 960 KB ||
* Minor Fix
|-
|7.0.3 || TAMediaAndroidSDK_7.0.3 || 4.23 MB ||
* SDK 功能優化
|-
|7.0.4 || TAMediaAndroidSDK_7.0.4 || 4.79 MB ||
* SDK 功能優化
|-
|8.0.0 || [[媒體:TAMediaAndroidSDK_8.0.0.zip|TAMediaAndroidSDK_8.0.0]] || 2.7 MB ||
* 新增原生廣告整合方式
* 調整橫幅與InRead廣告
* 新增兒童導向廣告設定
|-
|8.0.1 || [[媒體:TAMediaAndroidSDK_8.0.1.zip|TAMediaAndroidSDK_8.0.1]] || 2.7 MB ||
* SDK 功能優化
* 支援Android 12上取得AAID之宣告
|-
|8.0.2 || [[媒體:TAMediaAndroidSDK 8.0.2.zip|TAMediaAndroidSDK_8.0.2]] || 2.81 MB ||
* Minor Fix
|-
|8.0.3 || [[媒體:TAMediaAndroidSDK_8.0.3.zip|TAMediaAndroidSDK_8.0.3]] || 2.68 MB ||
* Minor Fix
|}

[[SDK8_Android_SDK_Developer_Guide|回首頁]]

檔案:TAMediaAndroidSDK 8.0.2.zip

2022-03-24T04:38:07Z

CCYu：CCYu 已上傳檔案:TAMediaAndroidSDK 8.0.2.zip